View 2STX136007_4301614.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2STX1360 2STL1360
Low voltage fast-switching NPN power bipolar transistors
Features

Very low collector-emitter saturation voltage High current gain characteristic Fast-switching speed
Applications

Emergency lighting Led CCFL drivers (back lighting) Voltage regulation Relay driver Figure 1. Internal schematic diagram TO-92 TO-92L
Description
The devices are NPN transistors manufactured using new "PB-HCD" (Power Bipolar High Current Density) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage.
Table 1.
Device summary
Marking X1360 L1360 Package TO-92 TO-92L Packaging Bulk Bulk
Order codes 2STX1360 2STL1360
July 2007
Rev 2
1/10
www.st.com 10
Electrical ratings
2STX1360 2STL1360
1
Electrical ratings
Table 2.
Symbol VCBO VCEO VEBO IC ICM Ptot Tstg TJ
Absolute maximum rating
Value Parameter 2STX1360 2STL1360 Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Total dissipation at T amb = 25C Storage temperature Max. operating junction temperature 1 80 60 6 3 5 1.2 -65 to 150 150 Unit V V V A A W C C Unit
Table 3.
Symbol Rthj-amb
Thermal data
Value Parameter TO-92 Thermal resistance junction-ambient __max 125 TO-92L 104.2 Unit C/W Unit
2/10
2STX1360 2STL1360
Electrical characteristics
2
Electrical characteristics
(Tcase = 25C unless otherwise specified) Table 4.
Symbol ICBO IEBO VBE VCE(sat) (1)
Electrical characteristics
Parameter Collector cut-off current (IE =0) Emitter cut-off current (IC =0) Base-emitter voltage Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain RESISTIVE LOAD Test Conditions VCB = 80V VEB = 6V VCE = 2V IC = 2A IC = 3A IC = 2A IC = 0.1A IC = 1A VCC = 10V (see figure 9) IC = 0.1A VCE = 10V IC = 100mA IB = 100mA IB = 150mA IB = 100mA VCE = 2V VCE = 2V IC = 3A 80 160 280 400 630 670 150 210 0.89 Min. Typ. Max. 100 100 730 300 500 1.2 Unit nA nA mV mV mV V
VBE(sat) (1) hFE (1)
td tr ts tf fT
Delay time Rise time Storage time Fall time Transition frequency
17 81 620 54 130
20 100 720 65
ns ns ns ns MHz
IB1 = -IB2 = 300mA
Note (1) Pulsed duration = 300 s, duty cycle 1.5%
2.1
Electrical characteristics (curves)
Figure 2. DC current gain Figure 3. DC current gain
3/10
Electrical characteristics Figure 4. Collector-emitter saturation voltage Figure 5.
2STX1360 2STL1360 Base-emitter saturation voltage
Figure 6.
Resistive load switching time Figure 7.
Resistive load switching time
Figure 8.
Reverse biased safe operating area
4/10
2STX1360 2STL1360
Electrical characteristics
2.2
Test circuit
Figure 9. Resistive load switching test circuit
1) Fast electronic switch 2) Non-inductive resistor
5/10
Package mechanical data
2STX1360 2STL1360
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
6/10
2STX1360 2STL1360
Package mechanical data
TO-92 BULK SHIPMENT MECHANICAL DATA
DIM.
mm. MIN. 4.32 0.36 4.45 3.30 2.41 1.14 12.70 2.16 0.92 0.41 5O TYP MAX. 4.95 0.51 4.95 3.94 2.67 1.40 15.49 2.41 1.52 0.56
A b D E e e1 L R S1 W V
0102782 C
7/10
Package mechanical data
2STX1360 2STL1360
TO-92L MECHANICAL DATA
DIM.
mm. MIN. 7.80 0.35 4.70 4 3.70 2.44 1.27 13.30 1.28 0.35 14.30 1.58 0.55 4.10 2.64 TYP MAX. 8.20 0.45 5.10
A b D D1 E e e1 L S1 W
7854933 A
8/10
2STX1360 2STL1360
Revision history
4
Revision history
Table 5.
Date 20-Oct-2006 16-Jul-2007
Revision history
Revision 1 2 Initial release Figure 2, 3,4,5,6,7 and figure 8 added. Changes
9/10
2STX1360 2STL1360
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
10/10

▲Up To Search▲

Price & Availability of 2STX136007

	To Download 2STX136007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .